| power4motion |
|
|
 |
|
| Wing gate control model CB11 |
 |
|
|
|
 |
 |
For 230V/50Hz motors
- Separate force setting for each gate wing
- Soft/Stop option
- Delay option for overlapping wings
- One wing opening option
- Dip switch for general program selection
- Automatic closing option
- Various radio module options (433MHz, 27MHz, 315MHz)
- Memory for 80 remote controls
- Connection for electronic lock
- External lighting control option
- Connection for safety light barriers (Protector System – 771E)
- Connection for contact strip, 8.2KOhm
- Watertight box supplied as standard
- Conforms with CE, EN12453 and EN13241-1
- TÜV-tested |
|
|
| Sliding gate control model CB22 |
|
|
|
|
 |
|
For 230V/50Hz motors
- "Power" start; to get heavy gates moving
- Soft/Stop option
- Adjustable active brake (immediately stops heavy gate wings)
- Dip switch for general program selection
- Electronic lock connection option
- Various radio module options (433MHz, 27MHz, 315MHz)
- Memory for 80 remote controls
- Connection for contact strip, 8.2KOhm
- Pedestrian mode (opens partially)
- Automatic closing option
- RPM sensor for reversing (option)
- IP45 box for external wall mounting available SGO1500)
- External lighting control option
- Connection for safety light barriers (Protector System – 771E)
- Conforms with CE, EN12453 and EN13241-1
- TÜV-tested |
|
|
|
| Sliding gate control model CB224 |
|
|
|
|
 |
|
The CB224 control board was designed for installation in a special box under the cover of the sliding gate drive and can be ordered as
an accessory, if not already available.
The control board can also be fitted externally (on the wall) in a waterproof box (203391).
The motor control unit is a highly modern electronic unit controlled by a microprocessor. It has all wiring facilities and functions required for safe operation. The control box with the motor control unit is mounted
with the cable entries facing down. It must not be permanently exposed to direct sunlight. The electronics can be used for the precise adjustment of the push-pull torque. The gate can be held by hand if the fitting/setting is correct. During operation, the gate can be stopped at all times via remote control, push-button or key-operated switch.
TECHNICAL DATA
Voltage: 24V/AC
Max. consumption: 300 mA
Drive max.: 5A
Power supply for accessories: 24 V~ 0.5 A max
Operating temperature: -25 ºC ÷ 55 ºC
Dimensions: 119x145 mm (without box) |
|
|
|
| Wing gate control model CB24 |
|
|
|
|
 |
|
- 24V DC openers
- High-performance transmissions
- Easily adjustable, electronic limit switches
- No end-stops needed
- Soft-start and soft-stop features
- Automatic reverse when obstacles identified
- Memory for 50 transmitters (billion & rolling code)
- Opening and closing of gate/door even during power failure
- power supply provided via back-up battery
- Power supply via solar panel (optional)
- Connections for:
relay light barriers
error protection light barrier system (771E)
key switch
simple push-button
loop detector
electrical lock
magnetic lock
alarm
flashlight
- Diagnosis LEDs
- Function adjustment via dip-/switch
- 24V output for external equipment
- NEMKO, CE-tested
- EN13241-1-tested |
|
|
|
| Limit Switch for Rolling Door Drives model LSR-4 |
|
|
|
|
 |
|
Limit switch LSR-4 for rolling door drives with integrated reversing contactor control.
Features:
- easily adjustable limit switch
- green, limit switch for OPEN
- white, limit switch for CLOSE
- red, safety limit switch for OPEN
- red. safety limit switch for CLOSE |
|
|
|
| Limit Switch for Rolling Door Drives model LSR-6 |
|
|
|
|
 |
|
Limit switch LSR-6 for rolling doors without integrated control.
Features:
- easily adjustable limit switch
- green, limit switch for OPEN
- green, additional limit switch for OPEN
- red, safety limit switch for OPEN
- red, safety limit switch for CLOSE
- white, additional limit switch for CLOSE
- white, limit switch for CLOSE |
|
|
|
| Limit Switch for Sectional Door Drives model LSS-4 |
|
|
|
|
 |
|
Limit switch LSS-4 for sectional door drives with integrated reversing contactor control.
Features:
- easily adjustable limit switch
- green. limit switch for OPEN
- white, limit switch for CLOSE
- red, safety limit switch for OPEN
- red, safety limit switch for CLOSE |
|
|
|
| Limit Switch for Sectional Door Drives model LSS-6 |
|
|
|
|
 |
|
Limit switch LSS-6 for sectional door drives without integrated control.
Features:
- easily adjustable limit switch
- green, limit switch for OPEN
- green, additional limit switch for OPEN
- red, safety limit switch for OPEN
- red, safety limit switch for CLOSE
- white, additional limit switch for CLOSE
- white, limit switch for CLOSE |
|
|
|
|
| Barriers |
 |
|
|
